Cast Steel Stainless Steel Shut-Off Valve for Oxygen Use
Product introduction:
Oxygen shut-off valve is a specialized shut-off valve designed to ensure the safe operation of oxygen pipelines, taking into account the combustion and explosion characteristics of oxygen medium, and based on the principles of safety, reliability, and superior performance.
On the basis of considering the operating characteristics of the oxygen pipeline network, the oxygen shut-off valve is made of high-quality silicon brass or stainless steel casting, which has the advantages of high mechanical strength, wear resistance, and good safety. It has the best explosion-proof and flame-retardant performance when used in oxygen pipelines, eliminating unsafe factors in oxygen pipelines; The sealing surface is made of stainless steel body processing or hard alloy welding, which is not easy to wear and scratch, has good sealing performance, and there is no relative sliding between the valve disc and the valve body sealing surface when opening and closing, so the wear and scratch are not serious, the sealing performance is good and with long service life time.
Product parameter:
| Type Number: |
JY41W-JGPV |
| Nominal Pressure PN(MPa) |
1.0 - 10.0 |
| Nominal Diameter DN(mm) |
15～600 |
| Test pressure (MPa) |
Strength (water) |
1.5 times of pressure nominal |
| |
Sealing (water) |
1.1 times of pressure nominal |
| Raw material |
WCB, CF8, CF8M, CF3, CF3M, |
| Medium suitable: |
Water, steam, oil and nitric acid etc corrosive medium |
| Working temperature |
200≤℃ |
| Connection type |
Flange |
| Operational method |
Hand-wheel, bevel gear, pneumatic and electric actuators |
Product features:
1. The valve body, stem, and internal components of a bypass oxygen shut-off valve are made of three types of materials: 304 austenitic stainless steel, copper alloy, and Inconel alloy.
2. There are three structural forms of high-pressure oxygen shut-off valves: single valve structure, internal bypass structure, and external bypass structure.
3. The medium flow direction of JY41W/H oxygen shut-off valve has two types: low inlet and high outlet, and high inlet and low outlet.
4. The valve stem structure of oxygen shut-off valve is divided into two types: rotating lifting rod and lifting rod.
5. The bracket part adopts a fully enclosed structure, covered with organic glass at the front and back, and fixed with screws to prevent oil dust from entering. There is a clear no oil mark on the cover plate;
6. The top exposed part of the valve stem is equipped with a protective cover, which can prevent dust and oil.
7. Anti static grounding bolts are designed on the outer circles of the flanges at both ends of the valve body.
8. All components undergo strict degreasing treatment before assembly.
|
|
ANSI GB Standard Cast Steel Stainless Steel Oxygen Globe Valve Shut-Off Valve Images
|
